MeshGuard Accessories

Tools that enhance your MeshGuard monitoring network

RAE PowerPAK

Keep your MeshGuard system up and running for extended periods with this rechargeable external battery unit. Built with a rugged stainless steel housing and certified intrinsically safe for Class I, Division 1 and ATEX Zone 0 hazardous environments, it is hot-swappable in the field.
The RAE PowerPak can run an LEL monitor for more than 20 days, and an electrochemical toxic gas monitor for more than 18 months.

Key Features:

• Rechargeable external battery extends run time of MeshGuard monitors
• Hot-swappable in the field
• Installation hardware included
• Class I, Division 1 ATEX Zone 0 certified for hazardous environments

Mesh Router

This versatile signal booster extends the range of your MeshGuard monitoring system to allow transmission and receipt of monitor readings and alarm statuses over a larger total area. The MeshRouter can also be used during deployment of a MeshGuard system to find the optimal locations for monitors, since it displays the wireless signal strength of connected monitors. Up to three MeshRouters can be combined to extend the communication range between monitors and the EchoView Host from 100m to up to 1 km. The rugged housing makes it effective for Class I, Division 1 hazardous environments. The unit can operate for 10 or more days with the internal battery and 45 or more days with an external PowerPak for continuous reliability.

Key Features

• Extends mesh network range
• Transmits monitor data and alarm status
• Displays real-time wireless signal strength
• Class I, Division 1 certified for hazardous environments
• Runs for 10+ days with internal battery, up to 45+ days with external RAE PowerPak

RAEMesh Reader

Turn any laptop or desktop PC into a wireless controller for MeshGuard monitors with this wireless solution. Using either an RS 232 serial or Ethernet port, the RAEMesh Reader transmits wireless sensor data to a PC running ProRAE Guardian software. Designed for indoor use in non-hazardous environments, the RAEMesh Reader also has an optional outdoor antenna and 10m cable to extend signal range.

Key Features

• Turns PC into a wireless controller
• RS232 or Ethernet connection
• Optional outdoor antenna
• 30-foot (10m) cable can extend range

EchoView Remote

The RAE Systems EchoView is a portable, intrinsically safe (Class I, Division 1 and Zone 0) alarm notification device that allows you to monitor your sensor network remotely. It displays the sensor readings of up to 16 MeshGuard Monitors on a wireless network and retrieves all monitor information that is typically viewed on the system controller.

Key Features

• Class I, Division 1 (Zone 0) certified
• Allows users to be away from the controller and still be notified of alarm conditions
• The EchoView gets all sensor readings directly from the controller
• 10+ days run time with internal battery, 45+ days run-time with external PowerPak

FA200 Alarm Bar

The FA200 Alarm Bar has one audible (112dB at 10ft/3m) and four visible alarms. The alarm logic is fully configurable from the FMC 2000 multi-channel controller. The FA200 Alarm Bar uses a simple mil-spec connector to connect to the FMC-2000 controller up to 10m (30ft) away. The five internal relays on the controller come pre-wired for use with an FA200 Alarm Bar, or can be rewired to trigger a variety of external alarms or process controls.

Key Features

• Part of the MeshGuard intelligent connected system of gas detection
• Plug-and-play operation with the FMC 2000 controller
• High-volume and easy-to-see alarms and sirens make it ideal for noisy industrial settings
• Rugged construction allows for continuous operation even in extreme environments

Enquire about MeshGuard Accessories