Sales & Support 1300 436 267
BW Clip Front View

BW Clip

With one-button operation, the BW Clip is compact, lightweight, and easy to handle, while tough enough for harsh environments and extreme temperatures. If there's an alarm, you'll know it even in noisy conditions thanks to the wide-angle flash, along with the audible and vibrating alerts. It flashes red when a bump test is due or a gas event occurs. This way, workers can help each other improve safety by easily spotting non-compliant detectors.

The BW Clip is up to three years maintenance-free. Just turn on the detector and it runs continuously. Thus no need for calibration, sensor replacement, battery replacement, or battery charging, which means great reliability and no downtime. When you use the two-year BW Clip for H2S or CO, you can hibernate the detector when you're not using it. By hibernating the detector, you can extend its usual life of 2 years up to 3 years.

With the BW Clip, there's no need to perform a manual self-test to check the detector's battery, sensor, and electronics. Instead, daily self-test happens automatically. If it finds an issue in critical functionality, it will shut down the detector to protect you from unsafe use.

Compatible with both the MicroDock II and the new IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards.

Configurable Options:

  • Configuration of high and low alarm set points before the device is activated
  • Adjustment of alarm set points and other parameters as needed throughout the lifespan
  • Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
  • Option to display gas reading during alarm
  • User settable bump test reminder
  • Option to display the Real-Time Clock

Contact Us for stock levels and order fulfillment

Sales & Support: 1300 436 267
Email: [email protected]

Sensor Range

  • H₂S, 
  • CO, 
  • O₂, 
  • SO₂.
  • Features
  • Specifications
  • Sensor Specs
  • Accessories
  • Video
  • PDF Download


  • H2S, SO2 - 2 or 3 Year
  • CO, O2 - 2 Year
  • Maintenance-free: no sensor or battery changes necessary
  • Compact, lightweight design with one-button operation
  • Designed for a range of harsh environments with extreme temperatures
  • Hibernation mode with case accessory or IntelliDox
  • Automated self-test of battery, sensor and electronics
  • Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
  • Automatic logging of the 35 most recent gas events and bump test results
  • Compatible with MicroDock II and Fleet Manager II software
  • Device Management with Honeywell Safety Suite


Series Specifications


1.6 x 2.0 x 3.4 in. / 4.1 x 5.0 x 8.7 cm


3.2 oz. / 92 g


H2S: -40to+122°F/-40to+50°C CO: -22 to +122°F / -30 to +50°C O2: -4 to +122°F / -20 to +50°C SO2: -22to+122°F/-30to+50°C


5% - 95% RH (non-condensing)


Visual, vibrating, audible (95 dB) • Low, High


Activated detectors automatically perform one internal diagnostic test every 24 hours

Typical Battery Life

Two years (H2S, CO, O2 or SO2) or three years (H2S or CO) depending on the version

Event Logging

35 most recent events

Ingress Protection

IP 66/67

Certifications and Approvals

For all certifications, please review the manual or consult Encore Monitoring.


Two or three years from activation (given normal operation), plus one year shelf life (6 months for O2). Up to three years for two-year H2S and CO detectors when used with the hibernation feature, limited to 24 months of detector operation.

Sensor Specs

Gas Measuring Range
H2S 0-100 ppm
CO 0-300 ppm
O2 0-25.0% by vol.
SO2 0-100 ppm


Hibernation Case

Part Number: CLIPB-CASE

Protective case for hibernation

Replacement Alligator-style Clip

Part Number: XT-AG-1

Stainless Steel with Screw

Hard Hat Clip

Part Number: GA-HC-1


Video Demo


Display Information

Hibernation Case


Enquire about BW Clip